Android 模拟器无法启动

Question

在尝试了 2 多周后，我正在努力让模拟器成功启动。我真的可以使用一些帮助解决问题或解决相同问题的提示。

我已经能够使用非常相似的配置在我的家用机器上成功启动模拟器。当我从我的工作电脑连接时它失败了，我相信有一些配置可能会阻止这个，但我不知道那个配置是​​什么，我在日志中看不到任何可以帮助我识别问题的错误.这也是我的同事普遍存在的问题，所以我确定这是我们工作站上设置的一些策略或注册表设置。

如果有人可以帮助我确定阻止模拟器启动的配置，我可以与 IT 团队合作进行必要的更改。

我的配置是

• Android Studio 1.2.1.1
• SDK/AVD 管理器 v 24.3.3
• Windows 7 x64
• 16 GB 内存
• DELL E6540 笔记本电脑 |戴尔 Optiplex 780 台式机
• 已安装 HAXM
• 尝试的 CPU 选项:Intel x86/x86_x64 和 Arm v7a
• 尝试的 RAM 选项:768MB、1GB 和 2GB
• 主机 GPU:开启和关闭都试过
• 在 BIOS 中启用了虚拟化

虚拟设备创建良好，但从未成功启动。我从来没有看到一扇 window 打开，我有好几次等了两个多小时。

这是我创建的三个 AVD 的日志

AVD 1

Arm v7a | 768 MB 内存 |安卓5.1.1 | API 22 |主机 GPU 关闭

输出:

emulator:Found AVD name 'avd1'
emulator:Found AVD target architecture: arm
emulator:Looking for ranchu emulator backed for arm CPU
emulator:Probing program: ./emulator64-ranchu-arm.exe
emulator:Probing program: ./emulator-ranchu-arm.exe
emulator:Probing path for: emulator64-ranchu-arm.exe
emulator:Probing path for: emulator-ranchu-arm.exe
emulator:Looking for emulator-arm to emulate 'arm' CPU
emulator:Probing program: ./emulator-arm.exe
emulator:Found target-specific emulator binary: ./emulator-arm.exe
emulator:GPU emulation is disabled
emulator:Quoted param: [./emulator-arm.exe]
emulator:Quoted param: [@avd1]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.android\avd\avd1.ini
emulator: virtual device content at C:\Users\Anon\.android\avd\avd1.avd
emulator: virtual device config file: C:\Users\Anon\.android\avd\avd1.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.android\avd\avd1.avd/hardware-qemu.ini
emulator: Found AVD target API level: 22
emulator: Read property file at C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/build.prop
emulator: No boot.prop property file found.
emulator: 'magic' skin format detected: 768x1280
emulator: autoconfig: -skin 768x1280
emulator: autoconfig: -skindir (null)
emulator: keyset loaded from: C:\Users\Anon\.android\default.keyset
emulator: found magic skin width=768 height=1280 bpp=16

emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does not support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/system.img
emulator: autoconfig: -initdata C:\Users\Anon\.android\avd\avd1.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.android\avd\avd1.avd/cache.img
emulator: Physical RAM size: 768MB

emulator: GPU emulation is disabled
emulator: WARNING: CPU acceleration only works with x86/x86_64 system images.
Content of hardware configuration file:
  hw.cpu.arch = arm
  hw.cpu.model = cortex-a8
  hw.ramSize = 768
  hw.screen = touch
  hw.mainKeys = no
  hw.trackBall = no
  hw.keyboard = yes
  hw.keyboard.lid = no
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = no
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.android\avd\avd1.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 768
  hw.lcd.height = 1280
  hw.lcd.depth = 16
  hw.lcd.density = 320
  hw.lcd.backlight = yes
  hw.gpu.enabled = no
  hw.initialOrientation = portrait
  hw.camera.back = none
  hw.camera.front = none
  vm.heapSize = 64
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = yes
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = no
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/ramdisk.img
  À¿)pV)ußK³ªc¥ú&µß>Oí‡yù®ù×=Vš§Ùïq—#ÊÿŠÿ¿Ù&Òßué—!MáÍFåÿ¾U)›±„yþ¿ƒð—ˆ_ˆøõÊ'Ò?{’é×@zQ¿Ü•úíÈQêñ©•„yÖ/þ[â—"~ü«|ü¶,%~em.img
  disk.systemPartition.size = 550m
  disk.dataPartition.path = C:\Users\Anon\.android\avd\avd1.avd/userdata-qemu.img
  disk.dataPartition.initPath = C:\Users\Anon\.android\avd\avd1.avd/userdata.img
  disk.dataPartition.size = 550m
  avd.name = avd1
.
QEMU options list:
emulator: argv[00] = "./emulator-arm.exe"
emulator: argv[01] = "-android-hw"
emulator: argv[02] = "C:\Users\Anon\.android\avd\avd1.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-arm.exe -android-hw C:\Users\Anon\.android\avd\avd1.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: Ramdisk image contains fstab.goldfish file
emulator: Found format of system partition: 'ext4'
emulator: Found format of userdata partition: 'ext4'
emulator: Found format of cache partition: 'ext4'
emulator: system partition format: ext4
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMP2084.tmp
emulator: nand_add_dev: system,size=0x22600000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMP2084.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-22\default\armeabi-v7a\/system.img,pagesize=512,extrasize=0
emulator: userdata partition format: ext4
emulator: nand_add_dev: userdata,size=0x22600000,file=C:\Users\Anon\.android\avd\avd1.avd/userdata-qemu.img,initfile=C:\Users\Anon\.android\avd\avd1.avd/userdata.img,pagesize=512,extrasize=0
emulator: cache partition format: ext4
emulator: Creating empty cache partition image at: C:\Users\Anon\.android\avd\avd1.avd/cache.img
Creating filesystem with parameters:
    Size: 69206016
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 4224
    Inode size: 256
    Journal blocks: 1024
    Label: 
    Blocks: 16896
    Block groups: 1
    Reserved block group size: 7
Created filesystem with 11/4224 inodes and 1302/16896 blocks
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.android\avd\avd1.avd/cache.img,pagesize=512,extrasize=0
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '64m'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '320'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'none'
emulator: Kernel parameters: qemu.gles=0 qemu=1 console=ttyS0 android.qemud=ttyS1 androidboot.hardware=goldfish android.checkjni=1 ndns=3
emulator: autoconfig: -scale 0.801562

AVD 2

英特尔凌动 x86 | 1536 MB 内存 |安卓4.3.1 | API 18 |使用主机 GPU

emulator:Found AVD name 'avd2'
emulator:Found AVD target architecture: x86
emulator:Looking for ranchu emulator backed for x86 CPU
emulator:Probing program: ./emulator64-ranchu-x86.exe
emulator:Probing program: ./emulator-ranchu-x86.exe
emulator:Probing path for: emulator64-ranchu-x86.exe
emulator:Probing path for: emulator-ranchu-x86.exe
emulator:Looking for emulator-x86 to emulate 'x86' CPU
emulator:Probing program: ./emulator-x86.exe
emulator:Found target-specific emulator binary: ./emulator-x86.exe
emulator:GPU emulation enabled using 'host' mode
emulator:Quoted param: [./emulator-x86.exe]
emulator:Quoted param: [@avd2]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.android\avd\avd2.ini
emulator: virtual device content at C:\Users\Anon\.android\avd\avd2.avd
emulator: virtual device config file: C:\Users\Anon\.android\avd\avd2.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.android\avd\avd2.avd/hardware-qemu.ini
emulator: Found AVD target API level: 18
emulator: Read property file at C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/build.prop
emulator: No boot.prop property file found.
emulator: 'magic' skin format detected: 768x1280
emulator: autoconfig: -skin 768x1280
emulator: autoconfig: -skindir (null)
emulator: keyset loaded from: C:\Users\Anon\.android\default.keyset
emulator: trying to load skin file 'C:\Users\Anon\AppData\Local\Android\sdk/tools/lib/emulator/skins/dynamic//layout'
emulator: loaded dynamic skin width=768 height=1280 bpp=16

emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/system.img
emulator: autoconfig: -initdata C:\Users\Anon\.android\avd\avd2.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.android\avd\avd2.avd/cache.img
emulator: Physical RAM size: 1536MB

emulator: GPU emulation enabled using 'host' mode
emulator: CPU Acceleration: working
emulator: CPU Acceleration status: HAX (version 2) is installed and usable.
emulator: Target arch = 'x86'
emulator: Auto-config: -qemu -cpu qemu32
Content of hardware configuration file:
  hw.cpu.arch = x86
  hw.cpu.model = qemu32
  hw.ramSize = 1536
  hw.screen = touch
  hw.mainKeys = no
  hw.trackBall = no
  hw.keyboard = yes
  hw.keyboard.lid = no
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = no
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.android\avd\avd2.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 768
  hw.lcd.height = 1280
  hw.lcd.depth = 16
  hw.lcd.density = 320
  hw.lcd.backlight = yes
  hw.gpu.enabled = yes
  hw.gpu.mode = host
  hw.initialOrientation = portrait
  hw.camera.back = emulated
  hw.camera.front = emulated
  vm.heapSize = 64
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = yes
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish clocksource=pit android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = yes
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/ramdisk.img
  disk.systemPartition.initPath = C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/system.img
  disk.systemPartition.size = 281m
  disk.dataPartition.path = C:\Users\Anon\.android\avd\avd2.avd/userdata-qemu.img
  disk.dataPartition.initPath = C:\Users\Anon\.android\avd\avd2.avd/userdata.img
  disk.dataPartition.size = 200m
  avd.name = avd2
.
QEMU options list:
emulator: argv[00] = "./emulator-x86.exe"
emulator: argv[01] = "-enable-hax"
emulator: argv[02] = "-android-hw"
emulator: argv[03] = "C:\Users\Anon\.android\avd\avd2.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-x86.exe -enable-hax -android-hw C:\Users\Anon\.android\avd\avd2.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: Ramdisk image contains fstab.goldfish file
emulator: Could not extract format of system partition!
emulator: Could not extract format of userdata partition!
emulator: Could not extract format of cache partition!
emulator: Probing system image file for partition type: C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/system.img
emulator: system partition format: yaffs2
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPA30C.tmp
emulator: nand_add_dev: system,size=0x11900000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPA30C.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/system-images\android-18\default\x86\/system.img
emulator: rounding devsize up to a full eraseunit, now 11904000

emulator: Probing userdata image file for partition type: C:\Users\Anon\.android\avd\avd2.avd/userdata.img
emulator: userdata partition format: yaffs2
emulator: nand_add_dev: userdata,size=0xc800000,file=C:\Users\Anon\.android\avd\avd2.avd/userdata-qemu.img,initfile=C:\Users\Anon\.android\avd\avd2.avd/userdata.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: cache partition format: yaffs2
emulator: Creating empty cache partition image at: C:\Users\Anon\.android\avd\avd2.avd/cache.img
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.android\avd\avd2.avd/cache.img
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '64m'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '320'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'both'
emulator: Initializing hardware OpenGLES emulation support
emulator: OpenGL Vendor=[Google (Intel)]
emulator: OpenGL Renderer=[Android Emulator OpenGL ES Translator (Intel(R) HD Graphics 4600)]
emulator: OpenGL Version=[OpenGL ES 2.0 (4.0.0 - Build 9.18.10.3220)]
emulator: Adding boot property: 'ro.opengles.version' = '131072'
emulator: device fd:988

emulator: Kernel parameters: qemu.gles=1 qemu=1 console=ttyS0 android.qemud=ttyS1 androidboot.hardware=goldfish clocksource=pit android.checkjni=1 ndns=3
emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/bios.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/lib/pc-bios/bios.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/vgabios-cirrus.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/lib/pc-bios/vgabios-cirrus.bin

emulator: autoconfig: -scale 0.801562

AVD 3

ARM | 512 MB 内存 |安卓2.3.3 | API 10 |使用主机 GPU 关闭

emulator:Found AVD name 'avd3'
emulator:Found AVD target architecture: arm
emulator:Looking for ranchu emulator backed for arm CPU
emulator:Probing program: ./emulator64-ranchu-arm.exe
emulator:Probing program: ./emulator-ranchu-arm.exe
emulator:Probing path for: emulator64-ranchu-arm.exe
emulator:Probing path for: emulator-ranchu-arm.exe
emulator:Looking for emulator-arm to emulate 'arm' CPU
emulator:Probing program: ./emulator-arm.exe
emulator:Found target-specific emulator binary: ./emulator-arm.exe
emulator:GPU emulation is disabled
emulator:Quoted param: [./emulator-arm.exe]
emulator:Quoted param: [@avd3]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.android\avd\avd3.ini
emulator: virtual device content at C:\Users\Anon\.android\avd\avd3.avd
emulator: virtual device config file: C:\Users\Anon\.android\avd\avd3.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.android\avd\avd3.avd/hardware-qemu.ini
emulator: Found AVD target API level: 10
emulator: No build.prop property file found.
emulator: No boot.prop property file found.
emulator: Cannot find target CPU architecture, defaulting to 'arm'
emulator: Cannot find target CPU ABI, defaulting to 'armeabi'
emulator: found skin 'WQVGA400' in directory: C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\skins
emulator: autoconfig: -skin WQVGA400
emulator: autoconfig: -skindir C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\skins
emulator: found skin-specific hardware.ini: C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\skins/WQVGA400/hardware.ini
emulator: keyset loaded from: C:\Users\Anon\.android\default.keyset
emulator: trying to load skin file 'C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\skins/WQVGA400/layout'
emulator: skin network speed: 'full'
emulator: skin network delay: 'none'
emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/system.img
emulator: autoconfig: -data C:\Users\Anon\.android\avd\avd3.avd/userdata-qemu.img
emulator: autoconfig: -initdata C:\Users\Anon\.android\avd\avd3.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.android\avd\avd3.avd/cache.img
emulator: Physical RAM size: 256MB

emulator: GPU emulation is disabled
emulator: WARNING: CPU acceleration only works with x86/x86_64 system images.
emulator: Target arch = 'arm'
Content of hardware configuration file:
  hw.cpu.arch = arm
  hw.ramSize = 256
  hw.screen = touch
  hw.mainKeys = yes
  hw.trackBall = yes
  hw.keyboard = yes
  hw.keyboard.lid = yes
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = yes
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.android\avd\avd3.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 240
  hw.lcd.height = 400
  hw.lcd.depth = 16
  hw.lcd.density = 120
  hw.lcd.backlight = yes
  hw.gpu.enabled = no
  hw.initialOrientation = portrait
  hw.camera.back = none
  hw.camera.front = none
  vm.heapSize = 32
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = no
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = yes
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/ramdisk.img
  disk.systemPartition.initPath = C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/system.img
  disk.systemPartition.size = 200m
  disk.dataPartition.path = C:\Users\Anon\.android\avd\avd3.avd/userdata-qemu.img
  disk.dataPartition.size = 200m
  avd.name = avd3
.
QEMU options list:
emulator: argv[00] = "./emulator-arm.exe"
emulator: argv[01] = "-android-hw"
emulator: argv[02] = "C:\Users\Anon\.android\avd\avd3.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-arm.exe -android-hw C:\Users\Anon\.android\avd\avd3.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: No fstab.goldfish file in ramdisk image
emulator: Probing system image file for partition type: C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/system.img
emulator: system partition format: yaffs2
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPE615.tmp
emulator: nand_add_dev: system,size=0xc800000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPE615.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/platforms\android-10\images\/system.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: Probing userdata image file for partition type: C:\Users\Anon\.android\avd\avd3.avd/userdata-qemu.img
emulator: userdata partition format: yaffs2
emulator: nand_add_dev: userdata,size=0xc800000,file=C:\Users\Anon\.android\avd\avd3.avd/userdata-qemu.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: cache partition format: yaffs2
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.android\avd\avd3.avd/cache.img
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '32m'
emulator: Adding boot property: 'ro.config.low_ram' = 'true'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '120'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '1'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'none'
emulator: Kernel parameters: qemu.gles=0 qemu=1 console=ttyS0 android.qemud=ttyS1 androidboot.hardware=goldfish android.checkjni=1 ndns=3
emulator: autoconfig: -scale 1

Answer 1

您是否正确安装了 HAXM？

我之前遇到过同样的问题，在学习之前HAXM 尚未启用 在 android sdk manager 中下载后。

您需要遵循一些步骤才能使用英特尔 HAXM 驱动程序从 Android* 模拟器中获得最佳体验。

先决条件

英特尔 HAXM 需要安装 Android* SDK(版本 17 或更高版本)。有关详细信息，请参阅 Android* 开发者网站 (http://developer.android.com/sdk/)。

System Requirements

Hardware Requirements:

Intel® processor with support for Intel® VT-x, Intel® EM64T (Intel® 64), and Execute Disable (XD) Bit functionality
At least 1 GB of available RAM
Supported Operating Systems:

Microsoft Windows* 8 and 8.1 (32/64-bit)
Microsoft Windows* 7 (32/64-bit)
Microsoft Windows Vista* (32/64-bit)
Important: Intel HAXM cannot be used on systems without an Intel processor, or with an Intel processor that lacks the hardware features described in the "Hardware Requirements" section above.
To determine the capabilities of your Intel processor, visit http://ark.intel.com/
Additionally, Intel HAXM can be used only with Android* x86 emulator images provided by Intel. 
Intel HAXM cannot be used with ARM* Android* emulator images or non-Intel x86 Android* emulator images.

1. 在 SDK 主目录下。即使 SDK 管理器显示“已安装”，它实际上也意味着英特尔 HAXM 可执行文件已下载。您仍然需要从“extras”目录运行安装程序才能安装它。

2.解压“extras”目录中的安装程序并按照您的平台的安装说明进行操作。

在 Windows* 上安装英特尔® HAXM

警告:如果您的系统不满足系统要求，包括对英特尔处理器功能的支持，例如英特尔虚拟化技术 (英特尔 VT)，英特尔 HAXM 安装将失败。

完成所有步骤后，它将正常工作。

希望对你有帮助...这里 Intel documentation