docker - 有没有办法强制 docker-machine 创建具有特定 ip 的 vm？

Question

有没有办法强制 docker-machine 创建具有特定 ip 的 docker vm(假设 ip 可用)？

Answer 1

这是在 docker/machine issue 1709 中主动请求的

I want to be able to specify the IP address of a VM (i.e. the value that's listed under "URL" in docker-machine ls) when I create it with docker-machine create.

I want this because I've been relying on boot2docker's default address of 192.168.59.103, but now it varies from machine to machine.

current workaround :

My virtualbox has dhcp range 192.168.99.100 - 255 and I want to set an IP before 100.

I've found a simple trick to set a static IP: after create a machine, I run this command and restart the machine:

echo "ifconfig eth1 192.168.99.50 netmask 255.255.255.0 broadcast 192.168.99.255 up" | docker-machine ssh prova-discovery sudo tee /var/lib/boot2docker/bootsync.sh > /dev/null

This command create a file bootsync.sh that is searched by boot2docker startup scripts and executed.

Now during machine boot the command is executed and set static IP.

docker-machine ls
NAME              ACTIVE   DRIVER       STATE     URL                                      SWARM
test-1                      -        virtualbox     Running   tcp://192.168.99.50:2376      test-1 (master)

Michele Tedeschi ( micheletedeschi ) adds

我已经更新了命令:

echo "kill `more /var/run/udhcpc.eth1.pid`\nifconfig eth1 192.168.99.50 netmask 255.255.255.0 broadcast 192.168.99.255 up" | docker-machine ssh prova-discovery sudo tee /var/lib/boot2docker/bootsync.sh > /dev/null

then run command (only the first time)

docker-machine regenerate-certs prova-discovery

now the IP will not be changed by the DHCP

(将 prova-discovery 替换为您的 docker 机器的名称)

---

这是我现在使用的 (Windows) 脚本 (dmvbf.bat)，基于上述内容:

@echo off
setlocal enabledelayedexpansion
set machine=%1
if "%machine%" == "" (
    echo dmvbf expects a machine name
    exit /b 1
)
set ipx=%2
if "%ipx%" == "" (
    echo dmvbf x missing ^(for 192.168.x.y^)
    exit /b 2
)
set ipy=%3
if "%ipy%" == "" (
    echo dmvbf y missing ^(for 192.168.x.y^)
    exit /b 3
)

echo kill $(more /var/run/udhcpc.eth1.pid) | docker-machine ssh %machine% sudo tee /var/lib/boot2docker/bootsync.sh >NUL
echo ifconfig eth1 192.168.%ipx%.%ipy% netmask 255.255.255.0 broadcast 192.168.%ipx%.255 up | docker-machine ssh %machine% sudo tee -a /var/lib/boot2docker/bootsync.sh >NUL
echo route add default gw <gateway ip address here> | docker-machine ssh %machine% sudo tee -a /var/lib/boot2docker/bootsync.sh >NUL

docker-machine ssh %machine% "sudo cat /var/run/udhcpc.eth1.pid | xargs sudo kill"

docker-machine ssh %machine% "sudo ifconfig eth1 192.168.%ipx%.%ipy% netmask 255.255.255.0 broadcast 192.168.%ipx%.255 up"

(注意:在 Windows 10 上，Monty Wild comments 是 udhcpc.eth0.pid ，而不是 udhcpc.eth1.pid)

我启动虚拟机(docker-machine start <machine-name>)，然后:

 dmvbf <machine-name> 99 101

我只这样做一次。

在下一个 docker-machine start <machine-name> ，则 IP 为 192.168.99.101。