I was using WampServer's fine. But after installing openEMR I noticed it is not starting anymore. When I test port 80 it shows the following error
我用的是WampServer的fine。但在安装openEMR后,我注意到它不再启动了。当我测试端口80时,它显示以下错误
***** Test which uses port 80 *****
*****使用端口80的测试*****
===== Tested by command netstat filtered on port 80 =====
=====通过命令netstat在端口80上进行测试=====
Port 80 is not found associated with TCP protocol
Port 80 is not found associated with TCP protocol
未找到与TCP协议关联的端口80未发现与TCP协议相关联的端口80
===== Tested by attempting to open a socket on port 80 =====
=====通过尝试打开端口80上的套接字进行测试=====
Your port 80 seems not actually used.
Unable to initiate a socket connection
Error number: 10060 - Error string: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
您的端口80似乎没有实际使用。无法启动套接字连接错误编号:10060-错误字符串:由于连接方在一段时间后没有正确响应,连接尝试失败,或者由于连接的主机未能响应,建立的连接失败。
image
形象
I have tried everything online relating to this topic but nothing works.
我在网上尝试了所有与这个话题有关的东西,但都不起作用。
更多回答
Please trim your code to make it easier to find your problem. Follow these guidelines to create a minimal reproducible example.
请修改您的代码,以便更容易地找到您的问题。按照这些指导原则创建一个最小限度的可重复示例。
优秀答案推荐
我是一名优秀的程序员,十分优秀!